vuraviation.blogg.se - Canon ip6310d ink absorber full

Press the OK button to clear the error, and then print the nozzle check pattern to examine the print head condition.įor information on how to print a nozzle check pattern, see Printing the Nozzle Check Pattern. Press the OK button to clear the error, and then load A4/Letter-sized plain paper in the auto sheet feeder.

Other than A4/Letter-sized plain paper is loaded.

PictBridge-compatible digital camera or digital video camcorder can be connected to your printer for Direct Printing. If the error is still unresolved, there is a possibility that you are using a digital camera or digital video camcorder that is not supported by this printer. Perform necessary operations according to the instruction manual supplied with your device. You may also have to turn on the device or select Play mode manually after connecting the device to the printer.

Once the ink absorber becomes completely full, printing cannot be performed.ĭisconnect the camera cable and reconnect it.ĭepending on the model or brand of your PictBridge compliant device, you may have to select a print mode before connecting the device. Press the OK button to cancel the error so you can continue printing. This error message indicates that the ink absorber is nearly full. The printer has a built-in ink absorber to hold the ink used during print head cleaning, for example. Install the FINE Cartridges in the appropriate positions. Some FINE Cartridges are not installed in place. If lines are misaligned or the resulting output is not satisfactory, carry out the print head alignment.

The FINE Cartridge may not be the compatible with this printer.

The FINE Cartridge may not be installed properly.

The resulting print quality is not satisfactory, if printing is continued under the ink out condition. Replace the empty FINE Cartridge immediately after the printing. Then printing can continue under the ink out condition with the FINE Cartridge installed. If printing is in progress and you want to continue printing, press the OK button on the printer. Replace the FINE Cartridge, and close the front cover.

If paper has jammed in the printer, clear the jam, reload the paper in the printer correctly and then press the OK button. Reload the paper correctly and press the OK button. Refer to "Memory Cards Supported by This Printer" in the Direct Printing Guide. There are no proper data in the memory card. Photo data edited/processed on the computer should be printed from the computer, not from the camera. If the Alarm lamp lights, and an error message is displayed on the LCD, take the corresponding countermeasure described below.